With the right Cotes dry-air solution in your wind turbine, you are able to comply with lower C3 or C2 corrosion standards rather than a higher C5 or C4 corrosion standard, saving up to 50% on component costs.
Without the right dry-air solution in your wind turbine you face issues like:
- Humidity gives rise to uncontrolled mould growth
- Mould is not allowed in working environments
- Health-hazard gases get trapped and accumulate
- Up to 25% of all faults are directly or indirectly caused by the corrosive combination of airborne humidity and salts
- Compliance with ISO 9223 corrosion class C4 or C5 will be needed
